Description
- Version: USB 3.0
- Package: Yes
- Shielding: Braid
- Packing: Polybag
- Application: Computer,Monitor,DVD Player,Projector,Television,TV box,Amplifier,MP3 / MP4 Player,Camera
- Type: USB Cables
- Connector B: USB
- Connector A: Micro USB
- Model Number: UTW23-FM-13P
- Gender: Male-Female
- Brand Name: ADT-Link
- Origin: Mainland China
- Certification: none
- 1: usb ribbon cable fpv
- 2: fpv flat extension cable
- 3: adt usb
- 4: usb photography cord
- 5: fold 90 degree usb cable
- 6: fpv aerial cable
- 7: usb flat 90 extension cable
- 8: flat USB
- 9: double 90 degree usb
- 10: fpv flat ribbon male
- 11: fpv flat cable
- 12: fpv flat male
- 13: fpv flat ribbon angle
- 14: USB Flat Extension cable male male
- 15: USB Ribbon cable male female
- 16: Micro usb ribbon cable
- 17: usb ribbon cable fpv
- 18: fold photography cord
- 19: usb c photography cord
- 20: type c photography cord
- 21: usb c flat extension cable
- 22: usb c extension ribbon cable 90 degree
- 23: fpv usb c
Brand name: ADT-LINK
Product name: USB 3.0 Type-c female to Micro-B male flat cable
Product model: UTW23-FM-13P series
Transfer speed: USB 2.0/ USB3.0 Standard(Positive plug 3.0; Reverse plug 2.0/3.0)
Wire length: 3~300 cm, the length can be customized,
Current capacity: 1.5 within 50cm ; 0.9A within 1 meter
Product application: GPS navigator, hard disk, Camera, ROCK Pi 4 Raspberry Pi MCU development board, built-in USB device to extend the use of adapter, convenient for brushless pan/tilt, USB power supply and camera video transmission of handheld pan/tilt, etc.
Note: This product is designed to be connected to built-in USB devices, and is not suitable for general external use. Does not support OTG external use.
ADT USB series Part-Number Description:
S=USB-A ; C=USB-C ; W=USB-B ; F=USB-E
Cable length Description:
The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector. For the wire length, please refer to the 5cm blue arrow in the figure below.
Note 1: (Master) means connecting to the host port,such as motherboard; (slave) means connecting to devices such as U Disk, Card Reader, Hard Disk Case,etc
Note 2: Type-C interface T4B/T5B reverse insertion only has 2.0 speed, if you need high speed 3.0, please choose the version with chip T4A/T5A/T5T.
Note 3: What is the difference between product model T4A/T5A/T5T and T4B/T5B?
T4A/T5A/T5T with chip, supports USB3.1 positive and negative plug, both are 10G high speed
T4B/T5B does not have a chip, and also supports positive and negative insertion. The positive insertion can support USB 3.1 high speed but the reverse insertion only supports USB 2.0 low speed
Product Image:
Product real shot:
Summary of technical issues:
1. Can wires and PCB connectors be split?
No, in order to purify the signal transmission and avoid the accident of wire falling off, our wire and PCB connectors is soldering and protected by the heat shrinkable tube sleeve, so the product can not be separated.
2. Cable thickness? Can it be bent?
The thickness of the wire is 1.4mm, and it can be bent and folded without affecting the use.
3. Is there any EMI shielding for Cable?
No metal shield. The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emissions of electromagnetic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.
Reviews
There are no reviews yet.